FOX 36 MY26 Mudguard

Description

Form-fitted coverage engineered for the updated FOX 36 chassis. Designed to integrate directly with the crown bleed-valve profile, this fender delivers a rigid barrier against trail spray without interfering with fork travel or tire clearance.

Developed for high-speed trail and enduro riding, this dedicated FOX 36 MY26 mudguard locks into the lower leg architecture to eliminate chatter and movement. Built for riders who demand a secure, noise-free setup that stays aligned through rough compressions.

Important Compatibility Note: Designed specifically for the MY26 edition of the FOX 36. It utilizes the factory mounting points on the rear of the crown and lower leg arches for a direct OEM-level fitment. If you own previous FOX 36 model, please choose mudguard for correct fersion.

Choose Your Coverage

Available in 4 distinct length configurations, allowing you to select the exact balance of weight savings and coverage needed for your local trail conditions.

Mini

Mini is tailored for dry to light-dust trail sessions, featuring a total length of 25 cm, with the rear section extending 21 cm (from the arch). Despite its sleek, low-profile footprint, it delivers focused shielding for your fork.

Racing

Racing is built for high-speed riding in variable conditions, offering a total length of 30.5 cm. It is striking a balance between weight reduction and effective coverage against flying dirt and trail spray.

Universal

Universal is engineered for all-around riding on wet, unpredictable trails, featuring a total length of 43 cm. The size is well-thought-out to capture tire fling and keep your vision clear in saturated conditions.

Long

Long is crafted for severe rain and deep mud, providing maximum coverage with a total length of 52.5 cm, of which the rear section measures 34.5 cm (from the arch). The extended overhang is specifically dimensioned to intercept heavy slurry and spray during extreme winter rides.

Built-in Seal Protection

Engineered to keep water, rocks, and fine grit off your upper tubes and main wiper seals. By extending coverage behind the fork arch, it prevents debris buildup on critical stanchion surfaces, helping to preserve fork performance and extending service intervals in wet or loose terrain.

Rigid 4-Bolt Direct Mounting

Demanding trail features require an anchor system that refuses to shift under heavy impacts. Shifting away from basic single-plane setups, this updated FOX 36 (MY26) mudguard employs a robust 4-point mechanical fastening system. It combines 2 upper bolts driven vertically into the fork arch with 2 lateral bolts threading straight into the dedicated factory ports on the lower legs. This reinforced four-point layout locks the shell in place, completely eliminating lateral flex, chatter, and tire rub for a dead-silent front end, all without a single zip-tie in sight.

Uncompromising Clearance for your FOX (29×2.6 Tire)

The shell of our fender precisely follows the internal shape of the arch, occupying only about 2 mm of space. This provides the maximum possible clearance for high-volume tires. This setup was tested thoroughly with 29×2.6 tires to ensure zero interference and zero mud packing.

Available in Multiple Colors

Our mudguards don’t just come in classic black. You can customize your setup from a wide range of colors, including graphite, grey, white, red, blue, yellow, green, and many more. Check out all available colors for your Fox 36 MY26 fender!

VisionVelo mudguard color options

World Cup Tested, Trusted in 55 Countries

For over 4 years, we have been designing mudguards precisely tailored to forks from brands such as RockShox, FOX, Ohlins, Manitou, EXT, and INTEND. Our designs are the result of extensive testing, even in the harshest racing conditions. We collaborate with professional DH and Enduro teams:

• Team Teufelsberg Berlin (2026)
• HR Racing Team (2025, 2026)
• Intense Factory Racing (2025)
• Seton Tuning DH Racing (2024)
• Pole Factory Racing (2023)
  
  

  Louise Ferguson during DHI World Cup at Bielsko Biała. Photo by @nathhughesphoto.

We are the official technological partner of NICOLAI, POLE, EXT, and INTEND. By choosing our products, you benefit from solutions proven by thousands of riders on trails all over the world.

Size Comparison

Dimensions of individual mudguards measured from the top front edge:

• Mini – 26cm long (5cm front/21cm rear)
• Racing – 31.5cm long (7.5cm front/23cm rear)
• Universal – 41cm long (12cm front/29cm rear)
• Long – 52.5cm long (18cm front/34.5cm rear)

Technical Specification

• Material – High-impact Polypropylene (PP)
• Manufacturing – Industrial 3D printing
• Weight – mini: 125g, racing: 142g, universal: 187g, long: 215g
• Box Contents – Two-piece mudguard, stainless steel mounting hardware, and vibration-absorbing foam backing strips