Öhlins RXF36 m.3 Mudguard

Description

Dedicated Mudguard for Öhlins RXF36 m.3

Finally, a fender as precise as your Öhlins. Pick your perfect length and enjoy a silent, bolt-on fit that stays secure no matter how hard you push.

The gold standard for your fork’s protection. This dedicated Öhlins RXF36 m.3 mudguard is precisely engineered to meet the performance standards of Swedish suspension. It provides a seamless, factory-integrated look and structural rigidity that universal, zip-tie fenders simply cannot match.

Important Compatibility Note: Before you buy, please verify your fork model. This mudguard is designed strictly for the Öhlins RXF36 m.3.

• RXF36 m.3: Compatible with this product.

• RXF36 m.1, m.2: Not compatible. The arch geometry and mounting points differ between these versions. You can shop your Ohlins RFX36 m. 2 here.

Unsure of your model? The “m.2” or “m.3” designation is typically found on the lower leg graphics. If you own the m.3 version, please select the dedicated m.3 fender from our shop.

Choose Between 4 Different Fender Sizes

Every trail demands a different level of coverage. We offer our Öhlins RXF36 fender in four distinct variants, allowing you to tailor your protection to your riding conditions. Available in four sizes between Mini to Long.

Mini

At 25 cm, our Öhlins RXF36 m.3 Mini mudguard is the most discreet, shuttle-friendly option. Its shortened rear profile is engineered to prevent interference with chairlift or shuttle bus front-wheel holders, making it the definitive choice for bike park regulars. It delivers essential seal protection with zero bulk.

Racing

The Racing variant is a short mudguard optimized for high-speed competition. At 33 cm long, its streamlined profile reduces drag while keeping your vision clear during flat-out descents. It is the definitive choice for racers seeking the best front MTB mudguard performance on gravity-focused laps.

Universal

Our Universal Öhlins fork fender is built for total versatility. With a length of 42 cm, it provides comprehensive coverage in varied, wet conditions. It acts as a reliable shield even in deep mud, proving to be the ideal balance between weight and protection for year-round riding.

Long

For the most brutal, high-speed mud and wet sessions, our Long variant is the ultimate extra-long front fender. Measuring 52 cm, it delivers a massive barrier against heavy spray and debris, ensuring you can hold your line even when the track is completely washed out.

Gold Standard Seal Protection for Your Öhlins RXF36 m. 3

The hallmark of our front mudguard is the integrated seal protector designed specifically for the RXF36 m.3. By shielding the stanchions and dust seals from direct grit impact it provides a visible difference in your oil during your suspension services. This is a vital Öhlins RXF36 splash guard for any rider looking to preserve the plush, factory-feel of their high-end suspension.

Uncompromising Tire Clearance (29×2.6 tire)

While generic bike fenders for MTB often rub or rattle, our guards are engineered to follow the exact internal curvature of the Öhlins arch. This ensures that even at full bottom-out, there is zero interference with the tire or crown. This makes it a high clearance MTB fender that takes up only 2.5 mm under the arch, leaving maximum room for mud shedding, even with 29×2.6 tires.

 Zip-Tie Free Bolt-On Mounting

Öhlins suspension deserves a secure, rattle-free setup. Our Öhlins RXF36 bolt-on mudguard utilizes the factory mounting points on the m.3 arch, providing a firm, mechanical connection. This unique design ensures enhanced stability through rock gardens and jumps, making it completely “zip-tie free” and silent on the trail.

“Factory-Like” Fit Without Adapters

The development of this custom fender began with a high-resolution 3D scan of the Öhlins RXF36 m.3 fork. This guarantees a perfect, flush fit against the arch, looking like an integral part of the fork’s design. If you value a clean build and an exact match for your premium setup, this is the only choice.

Available in Multiple Colors

Our mudguards don’t just come in classic black! You can choose from many other colors, such as graphite, grey, white, red, blue, yellow, green, and many more. Check out all available colors for Öhlins RXF36 m.3!

World Cup Tested, Trusted in 55 Countries

For over 4 years, we have been designing mudguards precisely tailored to forks from brands such as RockShox, FOX, Öhlins, Manitou, EXT, and INTEND. Our designs are the result of extensive testing, even in the harshest racing conditions. We collaborate with professional DH and Enduro teams:

• Team Teufelsberg Berlin (2026)
• HR Racing Team (2025, 2026)
• Intense Factory Racing (2025)
• Seton Tuning DH Racing (2024)
• Pole Factory Racing (2023)

Louise Ferguson during DHI World Cup at Bielsko Biała. Photo by @nathhughesphoto.

We are the official technological partner of NICOLAI, POLE, EXT, and INTEND. By choosing our products, you benefit from solutions proven by thousands of riders on trails all over the world.

Mix-and-Match System

Setup is personal for every MTB rider. Beyond our four standard sizes, our modular design allows you to independently combine different front and rear sections. This gives you 16 possible configurations to perfectly match your bike’s geometry and the day’s trail conditions.

Dimensions

• Mini – 25 cm (5 cm front / 20 cm rear)
• Racing – 33 cm (9 cm front / 24 cm rear)
• Universal – 42 cm (13 cm front / 29 cm rear)
• Long – 52 cm (17.5 cm front / 34.5 cm rear)

Technical Specification

• Material: Polypropylene (PP).
• Manufacturing Technology: 3D printing.
• Weight: mini – 132g, racing – 147g, universal – 187g, long – 230g.
• Available colors: Black, red, orange, yellow, and +15 others.
• In the box: All required mounting bolts made of A2 stainless steel.