This is fitting manual for bar holder dedicated for Bosch Kiox 300 display. The holder is designed for a display from Bosch Smart System.
Compatibility
The holder is compatible with 35 mm steering bar as well as 31 mm bar (with use of additional spacer). You should choose your bar diameter when ordering.
Tools needed
For installation you will need:
- 2.5 mm hex screwdriver
Before installation
You will need to source Kiox 300 display separately. You will need the following elements:
- Bosch Kiox 300 Display
- Bosch display interface (cable outlet front)
- Bosch Smart System display cable
Installation of the holder
Put the adapter on display interface.
Plug in two cables from the motor and from the controller.
Put the holder, next put two longer bolts and tighten them.
Unscrew and remove short bolt from the clamp.
Gently bend the clamp and put the holder onto the bar in place of it’s smallest dimeter. Cables should be located under the bar.
Position the holder according to your preference. Instert and tighten short bolt.
1 Comment
Joe T · August 9, 2023 at 11:45 am
This is my 3rd order from Vision Velo. Fit and function are spot on for this display holder as well as the controller holder and fenders I previously ordered. Highly recommend.