Voima chainguide manual - title photo

This is fitting manual for chainguide dedicated for Pole Voima.

Purpose and compatibility

The chainguide is dedicated fro Pole Voima ebike only, designed for specific sizes of chainring. At the moment there are three versions available for 32t, 34t and 36t chainrings.

Make sure you ordered chainguide appropriate to your chainring size.

There is possibility to adjust distance between chainguide and the frame by approx 1 mm.

Tools needed

For installation you will need:

  • 4 mm hex screwdriver

Before installation

You can remove your chain before installation to make the process easier, however it is not necessary.


Measure the distance between chainring and bolt slots on the frame.
Choose appropriate spacer with distance nearest to your measurement.
Put the spacer on the back of chainring body and screw in mounting bolts.
Inspect the position of the chainguide. The chainring should be in the middle between the plates. Replace the spacer if some adjustment is needed.
Tighten the mounting bolts. Be careful to not over tighten them. If you have torque wrench, you can tighten them with 4Nm torque.

That’s it, now it’s time for your test ride.

If you didn’t order you chainguide yet, you can do it here.


Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *

Select your currency