This is fitting manual for rear mudguards dedicated for Mondraker bikes.
Versions and compatibility
The mudguard is designed for the following Mondraker bikes with aluminum rear triangle:
- Chaser,
- Crafty,
- Crusher,
- Dusk.
Tools needed
For installation you will need:
- 2 mm allen key
- 3 mm allen key
Before installation
It is required to remove wheel before installation. If you plan to use protection film, apply it before installation of the mudguard.
Installation of the mudguard
Firstly you need to assemble both fender parts together. Use four bolts with conical heads.
Prepare main bolts by inserting them into holes in the mudguard.
Next “slide in” mudguard to the triangle until it fit mudguard brackets on the swingarm.
Screw in the main bolts.They must be positioned perpendicular to swingarm what is not intuitive. To help keeping right bolt position push gently bolt head towards mudguard. Be careful and screw the bolts very gently to make sure they are in right position.
That’s it. Reinstall the wheel and enjoy riding.
4 Comments
stephen liversidge · January 24, 2026 at 7:27 pm
Good evening
Will this fit the chaser 2025 if so I place a order
Regards Steve
Sławomir Gierek · January 26, 2026 at 10:41 am
Do you have threaded holes to bolt-on the mudguard on your seat stay?
Oliver Zotter · February 15, 2026 at 8:31 pm
Hallo,
i‘m looking for some mudguards for the „Crafty S“ (2025). But there are no holes for screws on the 2025 Version!
Please help.
Thanks
Oliver
Piotr Tulski · April 20, 2026 at 12:44 pm
A Crafty S version is on our roadmap and will be available in a couple of months.